FAQs & Troubleshooting
Popular |
173 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2Fabric puckers
- 3Tips for sewing thin fabrics
- 4Bobbin thread breaks
- 5How do I adjust thread tension for embroidering?
- 6How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 7It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 8Touch panel is malfunctioning.
- 9How to change the needle stop position
- 10The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
- 11How do I wind the bobbin?
- 12"Preventive maintenance is recommended." ppears on the LCD.
- 13Tips for sewing thick fabrics
- 14How do I thread the machine (Threading the upper thread)?
- 15[Embroidery machine users] How to retrieve the data transferred from Artspira
- 16"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
- 17Stitches are skipped
- 18Tips for sewing an even seam allowance
- 19How do I adjust the sensitivity of the operation keys?
- 20How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 21How do I remove or attach the Embroidery foot ?
- 22How do I pull up the bobbin thread?
- 23Data cannot be saved to a USB flash drive
- 24How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 25"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 26How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 27How do I attach or remove the embroidery frame ?
- 28How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 29Data cannot be transferred even though the machine number has been input. (M5622201)
- 30M4341001 appears on the Artspira app screen.
- 31Tips for sewing leathers or vinyl fabrics.
- 32The embroidery design cannot be imported to the design page on PE-DESIGN 11 from the embroidery machine via the wireless network.
- 33Basic procedure to sew stitches
- 34How to sew reverse stitches or reinforcement stitches
- 35"F07" appears on the LCD. What does it mean?
- 36How do I hoop the fabric in the embroidery frame?
- 37How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 38How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 39"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 40"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 41"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 42"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 43"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 44"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 45"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 46"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 47How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 48Basic technique for sewing
- 49The wireless network connection cannot be set up between the embroidery machine and the computer with PE-DESIGN 11.
- 50"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?