FAQs & Troubleshooting
 |
Popular |
79 Results
- 1How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 2Combination of fabric, thread and needle
- 3How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 4How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 5How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 6How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 7How do I clean the race?
- 8How do I remove the presser foot holder?
- 9"Lower the presser foot lever." appears on the LCD.
- 10"Calculating the time required... Please wait." appears on the LCD.
- 11Why does the lower thread keep breaking?
- 12When thread got tangled.
- 13How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 14How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 15How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 16How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 17How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 18How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 19How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 20How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 21"Saved on another embroidery card." appears on the LCD.
- 22"Turn off the power and insert an embroidery card." appears on the LCD.
- 23"This embroidery pattern can not be used on this machine." appears on the LCD.
- 24"No more stitches can be combined." appears on the LCD.
- 25"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 26"Twin needles can not be used for this pattern." appears on the LCD.
- 27"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 28"Press the back key to return to the screen to sew." appears on the LCD.
- 29"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 30"The safety device has been activated." appears on the LCD.
- 31The thread tension is incorrect.
- 32How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 33Place a spool of thread on a spool pin.
- 34How do I correctly install a bobbin?
- 35Incorrect thread tension
- 36How do I manually thread the needle?
- 37How do I load the spool into the thread cassette?
- 38"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 39"Saved on an embroidery card." appears on the LCD.
- 40"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 41"Press needle position button to raise needle." appears on the LCD.
- 42"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 43"Selected a pattern." appears on the LCD.
- 44"Delete the selected pattern." appears on the LCD.
- 45"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 46"Data volume is too large for this pattern." message appearing on the LCD. What does it mean?
- 47"Change to the single needle mode." appears on the LCD.
- 48"Lower the buttonhole lever." appears on the LCD.
- 49"Disconnect the foot control." appears on the LCD.
- 50"Insert thread cassette." message appearing on the LCD. What does it mean?
