FAQs & Troubleshooting
 |
Popular |
325 Results
- 1Mat and Cutting Blade Combinations
- 2List of Error Messages for CanvasWorkspace (E##### / N#####)
- 3The mat or the material catches on a feed roller during cutting/drawing.
- 4Downloading Optional Design Pattern Collection
- 5About Blade Extension, Cutting Pressure and Mat
- 6The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 7Mat and Material Combinations
- 8How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 9Adjusting the Blade Extension
- 10Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 11Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 12List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 13What should I do if the scanned and cut positions are misaligned?
- 14List of Error Messages for CanvasWorkspace (Others)
- 15E10004 appears on the computer screen.
- 16Can I create the cutting data for ScanNCut from the image data?
- 17The mat is fed in at an angle and is not fed during cutting / drawing.
- 18If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 19What should I do to ensure the rhinestones are secured to my material?
- 20Cutting/Drawing by Tracing an Image
- 21“The entered text cannot be used.“ appears on the computer screen.
- 22ErrS99 appears on the computer screen.
- 23ErrS08 appears on the computer screen.
- 24ErrS04 appears on the computer screen.
- 25Can I create the cutting data for ScanNCut from vector graphics data?
- 26When the mat is inserted, the attached material peels off.
- 27Scanning Images (Scan to USB)
- 28ErrS23 appears on the computer screen.
- 29ErrS09 appears on the computer screen.
- 30What is the Difference between "Pen Holder", "Universal Pen Holder" and "Small Barrel Pen Holder"?
- 31N11001 appears on the computer screen.
- 32E99902 appears on the computer screen.
- 33E11002 appears on the computer screen.
- 34E00011 appears on the computer screen.
- 35E00006 appears on the computer screen.
- 36E00005 appears on the computer screen.
- 37E00004 appears on the computer screen.
- 38E00001 appears on the computer screen.
- 39Enhanced Image Tracing : Editing/Adjusting the Tracing Area. [Video]
- 40How do I Scan for Cutting (Direct Cut) ?
- 41Replacement Criteria
- 42What type of data can my ScanNCut machine be used?
- 43ErrS52 appears on the computer screen.
- 44ErrS51 appears on the computer screen.
- 45ErrS25 appears on the computer screen.
- 46ErrS12 appears on the computer screen.
- 47ErrS10 appears on the computer screen.
- 48ErrS06 appears on the computer screen.
- 49ErrS01 appears on the computer screen.
- 50The Pattern for Paper Piercing or The Paper Piercing Menu Is Not Displayed.
