FAQs & Troubleshooting
Popular |
33 Results
- 1Adjusting the thread tension dials
- 2To secure chains
- 3Preparation before threading
- 4How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 5How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 6Oiling
- 7Threads break
- 8THREADING
- 9How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 10How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 11How to set the thread change assembly (Two-thread sewing)
- 12Using the wide table
- 13Cleaning
- 14Free-arm sewing (removing bed extension)
- 15The fabric does not feed through.
- 16Threading the left needle
- 17Threading the upper looper
- 18Threading the lower looper
- 19How to attach and remove the presser foot
- 20Fabric is puckered
- 21Needles break
- 22How to use the thread spool cap
- 23How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 24Adjusting the presser foot pressure
- 25Differential feed adjustment
- 26How to remove and install the needle
- 27Needle
- 28If threads break during sewing
- 29Retracting knife
- 30Sewing Materials, Threads and Needles Comparison Chart
- 31Stitches are not uniform
- 32Skipped stitches
- 33Threading the right needle