FAQs & Troubleshooting
 |
Popular |
33 Results
- 1Using the wide table
- 2How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 3How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 4How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 5Threading the right needle
- 6Threading the upper looper
- 7How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 8Differential feed adjustment
- 9How to attach and remove the presser foot
- 10Needle
- 11The fabric does not feed through.
- 12Adjusting the thread tension dials
- 13Adjusting the presser foot pressure
- 14Cleaning
- 15Free-arm sewing (removing bed extension)
- 16Threading the lower looper
- 17Preparation before threading
- 18How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 19How to set the thread change assembly (Two-thread sewing)
- 20How to remove and install the needle
- 21Oiling
- 22If threads break during sewing
- 23To secure chains
- 24Retracting knife
- 25Sewing Materials, Threads and Needles Comparison Chart
- 26Fabric is puckered
- 27Stitches are not uniform
- 28Skipped stitches
- 29Threads break
- 30Needles break
- 31Threading the left needle
- 32THREADING
- 33How to use the thread spool cap
