FAQs & Troubleshooting
Popular |
94 Results
- 1How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 2How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 3Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 4Maintenance (Cleaning around the needle plate) [ Video ]
- 5Maintenance (Oiling the machine) [ Video ]
- 6Maintenance (Cleaning the bobbin case) [ Video ]
- 7How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 8How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 9How to set up the cap frame. [Video instructions]
- 10How to set up the cap frame driver. [Video instructions]
- 11"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 12"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 13"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 14"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 15"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 16"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 17"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 18"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 19"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 20"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 21Maintenance (Clean the hook) [ Video ]
- 22"Needle threader is in threading position." message appears on the LCD. What does it mean?
- 23"Stop while needle bar case transferring." message appears on the LCD. What does it mean?
- 24"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 25"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 26"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 27"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 28"Picker error" message appears on the LCD. What does it mean?
- 29How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 30How to use the the versatile magnetic frame [Video instructions]
- 31"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 32"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 33"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 34"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 35"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 36How to Embroider on Bag. [Video instructions]
- 37How to Embroider on Pet Collar. [Video instructions]
- 38How to Embroider on Shoes. [Video instructions]
- 39Maintenance (Oiling the machine)
- 40Maintenance (Clean the hook)
- 41How do I install the bobbin wound with thread?
- 42"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 43"This pattern cannot be used." message appears on the LCD. What does it mean?
- 44"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 45"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 46"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 47"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 48Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 49How do I change the volume of operation sounds or alarm sounds?
- 50Maintenance (Cleaning the bobbin case)