FAQs & Troubleshooting
![]() |
Popular |
33 Results
- 1To secure chains
- 2Oiling
- 3Preparation before threading
- 4Adjusting the presser foot pressure
- 5Retracting knife
- 6Fabric is puckered
- 7Threading the right needle
- 8How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 9How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 10How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 11How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 12How to set the thread change assembly (Two-thread sewing)
- 13Free-arm sewing (removing bed extension)
- 14Differential feed adjustment
- 15Using the wide table
- 16Stitches are not uniform
- 17Needles break
- 18Threading the left needle
- 19Threading the upper looper
- 20How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 21How to attach and remove the presser foot
- 22How to remove and install the needle
- 23Needle
- 24Cleaning
- 25If threads break during sewing
- 26Sewing Materials, Threads and Needles Comparison Chart
- 27Skipped stitches
- 28Threads break
- 29The fabric does not feed through.
- 30Threading the lower looper
- 31THREADING
- 32How to use the thread spool cap
- 33Adjusting the thread tension dials