FAQs & Troubleshooting
![]() |
Popular |
166 Results
- 101"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 102"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 103"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 104"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 105"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 106When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 107How do I remove the presser foot holder?
- 108When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 109The thread tension is incorrect.
- 110How do I sew buttonholes?
- 111How do I sew an applique?
- 112"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 113"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 114"This file cannot be used." message appears on the LCD. What does it mean?
- 115"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 116"OK to delete the setting?" message appears on the LCD. What does it mean?
- 117How do I thread my machine when using the twin needle mode ?
- 118How do I place edge sewing sheet?
- 119The "Pivot" key can not be selected.
- 120With free-motion quilting, skipped stitches or needle breakage occur
- 121"This USB media is incompatible." message appears on the LCD. What does it mean?
- 122"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 123"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 124"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 125"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 126"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 127"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 128"Select a pattern." message appears on the LCD. What does it mean?
- 129Why does the needle keep breaking?
- 130Fabrics and stabilizer material for embroidery
- 131Upper threading (Point)
- 132How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 133How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 134How to use the Couching foot. (Optional accessory : SA199 / F072, SA199V / F073) [Video instructions]
- 135For better results when sewing stretch fabrics
- 136"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 137"There are no enough colors in the thread table, for the selected mode." message appears on the LCD. What does it mean?
- 138"Failed to save file." message appears on the LCD. What does it mean?
- 139How do I change the volume of operation sounds or alarm sounds?
- 140How do I attach or remove the embroidery frame ?
- 141How do I attach or remove the Embroidery Unit?
- 142How do I attach the walking foot ?
- 143How do I thread my machine ?
- 144How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 145How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 146How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 147The "Fabric Seam Allowance" distance indication changes when lowering the presser foot after positioning the fabric in edge sewing function.
- 148Despite selecting an edge sewing-compliant pattern, edge-sewing key appears in grey and cannot be selected.
- 149When can we use Standard GREEN Marked Bobbin Case?
- 150Why is there an extra needle plate supplied with my machine?