FAQs & Troubleshooting
Popular |
236 Results
- 51The App shows the message "The sheet could not be detected. Make sure that the sheet and mobile device are level."
- 52The sewing stitch design data cannot be transferred from PE-DESIGN 11 to the sewing machine via the wireless network.
- 53How to use the stitch pattern explanation function.
- 54Cannot thread the needle.
- 55The bobbin thread cannot be pulled up.
- 56Bobbin thread breaks
- 57The fabric feeds in the opposite direction.
- 58The needle contacts the needle plate.
- 59How do I retrieve the embroidery pattern from the machine’s memory?
- 60M4210001 appears on the Artspira app screen.
- 61"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- 62How do I set the bobbin ?
- 63M5612301 appears on the Artspira app screen.
- 64How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 65Data cannot be transferred even though the machine number has been input. (M5622201)
- 66M3124301 appears on the Artspira app screen.
- 67M2102501 appears on the Artspira app screen.
- 68How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 69Introducing Brother My Stitch Monitor application
- 70List of Error messages for My Design Snap
- 71Tutorial videos on how to use My Stitch Monitor with the machine [Video instructions]
- 72How do I get a lens calibration sheet?
- 73How to find the security information (SSID and network key) for your home network
- 74"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?
- 75"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
- 76"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
- 77Cannot lower the presser foot with the presser foot lever
- 78Machine does not operate.
- 79High-pitched sound while sewing
- 80Stitch pattern does not turn out
- 81How to Use the Thread Trimming Function. (Jump Stitch Trim)
- 82How do I change the font type in the embroidery pattern?
- 83How do I remove or attach the presser foot holder?
- 84Incorrect thread tension
- 85For better results when sewing stretch fabrics
- 86How do I attach or remove the Embroidery Unit?
- 87How do I remove or attach the presser foot ?
- 88How do I thread my machine ?
- 89How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 90How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 91How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 92How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 93How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 94How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 95How do I recall a specific embroidery pattern from a USB flash drive?
- 96E96001 appears on the Artspira app screen.
- 97M4345001 appears on the Artspira app screen.
- 98Introducing the Brother Artspira application
- 99How to set up the wireless network connection with the wizard on the machine
- 100Upper thread breaks.