FAQs & Troubleshooting
![]() |
Popular |
168 Results
- 51"F**" appears on the LCD. What does it mean?
- 52"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 53"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 54"This USB media cannot be used." message appears on the LCD. What does it mean?
- 55"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 56"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 57"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 58I cannot view the Cutting and Embroidery Designs using the [AR function]. (AndroidTM Device only)
- 59Data cannot be saved to the machine
- 60M3124301 appears on the Artspira app screen.
- 61What should I do if my machine fails to connect to the wireless network and the connection becomes unstable?
- 62"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
- 63"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
- 64Bobbin thread breaks
- 65How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 66How do I enter a line feed in the embroidery pattern?
- 67"Not enough available memory to save." message appears on the LCD. What does it mean?
- 68"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 69When the thread became tangled under the bobbin winder seat
- 70How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 71How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 72How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 73How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 74How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 75How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 76How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 77How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 78"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 79"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 80"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 81M5612301 appears on the Artspira app screen.
- 82M4345001 appears on the Artspira app screen.
- 83How to disconnect a machine from Artspira using the machine
- 84M4341001 appears on the Artspira app screen.
- 85"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 86"Turn off the power and replace the needle plate." appears on the LCD.
- 87"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 88"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 89"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 90"Lower the buttonhole lever." message appears on the LCD. What does it mean and how do I clear it?
- 91"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 92E92001 appears on the Artspira app screen.
- 93M5613201 appears on the Artspira app screen.
- 94After selecting data, "Downloading" is displayed and the screen does not change to the next screen
- 95Multiple data cannot be transferred to the machine at once
- 96There is no machine that can be transferred
- 97How to link accounts
- 98About the contents and data treated by Artspira app
- 99Introducing the Brother Artspira application
- 100List of Error Messages for Artspira app (Mxxxxxxx/Exxxxx)