FAQs & Troubleshooting
![]() |
Popular |
166 Results
- 51"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 52"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 53"This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 54"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 55Why does the upper thread keep breaking?
- 56Why is the outline sewing off the pattern?
- 57Embroidery
- 58How do I correctly install a bobbin?
- 59"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 60If the thread breaks during sewing.
- 61"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 62"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 63"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 64How do I set the bobbin ?
- 65"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 66"Transmitting by USB" message appears on the LCD. What does it mean?
- 67"This USB media cannot be used." message appears on the LCD. What does it mean?
- 68"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 69"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 70"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 71"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
- 72"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 73How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 74How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 75"Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?
- 76How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 77"Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?
- 78"There are no enough colors in the custom thread table, for the selected mode." message appears on the LCD. What does it mean?
- 79"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 80How do I change the needle ?
- 81How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 82How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 83How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 84How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 85How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 86How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 87I've run out of pre-packaged Embroidery positioning stickers. How can I get extra stickers?
- 88Which pattern can be used in the Edge Sewing function?
- 89When setting fabric for edge sewing, the fabric edge indicator line does not appear on the LCD screen / the Fabric edge indicator line doesn't align with the edge of the fabric / the "Distance from edge of fabric" indication doesn't stabilize.
- 90The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
- 91How do I thread my machine for use with the twin needle option?
- 92How do I wind the bobbin?
- 93Sewing is started even though the presser foot is raised.
- 94It is difficult to pass the thread through the needle bar thread guide(hook).
- 95The needle strikes the presser foot
- 96How do I create a space between characters?
- 97How do I recall a specific embroidery pattern from the computer?
- 98"OK to move the embroidery carriage to its original position?" message appears on the LCD. What does it mean?
- 99"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 100"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?