FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How to set up the cap frame driver. [Video instructions]
- 2How to set up the cap frame. [Video instructions]
- 3Color thread table
- 4How to Embroider on Cap. [Video instructions]
- 5How to Embroider on Pet Collar. [Video instructions]
- 6How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 7How to Embroider on Bag. [Video instructions]
- 8How to Embroider on Shoes. [Video instructions]
- 9Colors of Tajima (.dst) embroidery data
- 10Creating Beautiful Embroidery ( Hooping techniques )
- 11Loops appear on the surface of the fabric when embroidering.
- 12What is DST ?
- 13The thread tension is incorrect.
- 14Maintenance (Oiling the machine)
- 15"Preventive maintenance is recommended" appears on the LCD.
- 16How do I change the needle?
- 17"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 18Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 19"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 20Embroidery pattern does not sew out correctly.
- 21How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 22How do I use the embroidery sheet ?
- 23How do I adjust the tension of the bobbin thread ?
- 24There is puckering in the fabric.
- 25"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 26"Trimming sensor error." message appears on the LCD. What does it mean?
- 27"This function cannot be used when patterns are overlapping." message appears on the LCD. What does it mean and how do I clear it?
- 28How do I adjust the tension of the upper thread ?
- 29When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 30"This USB media cannot be used." message appears on the LCD. What does it mean?
- 31"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 32"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 33How do I embroider on small pieces of fabric ?
- 34Maintenance (Cleaning around the needle plate)
- 35"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 36The upper thread does not reach the bobbin thread when embroidering begins.
- 37The bobbin thread breaks.
- 38"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 39"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 40"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 41"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 42How do I attach or remove the embroidery frame ?
- 43How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 44What is Wiper ?
- 45Why does the upper thread keep breaking?
- 46"This USB media is incompatible." message appears on the LCD. What does it mean and how do I clear it?
- 47"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 48"This file cannot be used." message appears on the LCD. What does it mean?
- 49"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 50"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?