FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How to Embroider on Bag. [Video instructions]
- 2How to Embroider on Pet Collar. [Video instructions]
- 3How to Embroider on Cap. [Video instructions]
- 4Color thread table
- 5How to set up the cap frame. [Video instructions]
- 6How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 7How to set up the cap frame driver. [Video instructions]
- 8How to Embroider on Shoes. [Video instructions]
- 9What is DST ?
- 10Embroidery pattern does not sew out correctly.
- 11How do I use the embroidery sheet ?
- 12Creating Beautiful Embroidery ( Hooping techniques )
- 13Colors of Tajima (.dst) embroidery data
- 14When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 15The thread tension is incorrect.
- 16How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 17Maintenance (Cleaning the thread paths of the upper threads)
- 18"Preventive maintenance is recommended" appears on the LCD.
- 19How do I thread the machine? (Threading the upper thread)
- 20Maintenance (Oiling the machine)
- 21"Picker error" message appears on the LCD. What does it mean?
- 22"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 23"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean and how do I clear it?
- 24How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 25Stabilizers (Backing)
- 26There is puckering in the fabric.
- 27"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 28"This pattern cannot combine." message appears on the LCD. What does it mean?
- 29How do I install the bobbin wound with thread?
- 30"Trimming sensor error." message appears on the LCD. What does it mean?
- 31"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 32"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 33"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 34"OK to cancel embroidering?" message appears on the LCD. What does it mean and how do I clear it?
- 35How do I attach or remove the embroidery frame ?
- 36How do I embroider on large pieces of fabric or heavy clothing ?
- 37How do I adjust the tension of the upper thread ?
- 38How do I resume embroidering after turning off the machine ?
- 39How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 40What is Wiper ?
- 41Maintenance (Cleaning the bobbin case)
- 42"Needle threader is in threading position." message appears on the LCD. What does it mean and how do I clear it?
- 43The needle threader cannot be used.
- 44Stitches are skipped.
- 45The upper thread does not reach the bobbin thread when embroidering begins.
- 46"Wiper error." message appears on the LCD. What does it mean and how do I clear it?
- 47"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 48How do I change the needle?
- 49How do I adjust the tension of the bobbin thread ?
- 50Maintenance (Cleaning around the needle plate)