FAQs & Troubleshooting
![]() |
Popular |
98 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 3How to use the Round frame (PRPRFK1) [Video instructions]
- 4Color thread table
- 5How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 6How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 7How to set up the cap frame. [Video instructions]
- 8How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 9Colors of Tajima (.dst) embroidery data
- 10The thread tension is incorrect.
- 11Embroidery pattern does not sew out correctly.
- 12"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 13What is DST ?
- 14Maintenance (Clean the hook)
- 15Replacing the needle [Video instructions]
- 16"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 17How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 18Why does the upper thread keep breaking?
- 19Nothing happens, even if the LCD display is pressed.
- 20"Wiper error." message appears on the LCD. What does it mean and how do I clear it?
- 21"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 22How do I adjust the tension of the bobbin thread ?
- 23Maintenance (Cleaning the bobbin case)
- 24"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 25Replacing the hook of the automatic needlethreading mechanism [Video instructions]
- 26How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 27Bobbin thread does not wind neatly on the bobbin.
- 28There are needle cuts or holes in the garment.
- 29The machine is noisy while embroidering.
- 30How do I use the embroidery sheet ?
- 31Creating Beautiful Embroidery ( Hooping techniques )
- 32How do I resume embroidering after turning off the machine ?
- 33How to set up the cap frame driver. [Video instructions]
- 34How do I thread the machine? (Threading the upper thread)
- 35The needle threader cannot be used.
- 36Stitches are skipped.
- 37LED pointer does not indicate the position correctly.
- 38Although the thread is not broken, a broken thread error occurs and the machine stops.
- 39The upper thread does not reach the bobbin thread when embroidering begins.
- 40"This pattern cannot combine." message appears on the LCD. What does it mean?
- 41"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 42"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?
- 43How do I attach or remove the embroidery frame ?
- 44How do I embroider on small pieces of fabric ?
- 45How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 46How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 47What is Wiper ?
- 48Maintenance (Cleaning around the needle plate)
- 49"Picker error" message appears on the LCD. What does it mean?
- 50Stabilizers (Backing)