FAQs & Troubleshooting
Popular |
67 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 2How to use the Multi-purpose Screwdriver.
- 3How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 4How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 5How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 6Where do I put the oil in my machine?
- 7"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 8When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 9How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 10How do I clean the race?
- 11"Preventive maintenance is recommended" appears on the LCD.
- 12Embroidery
- 13"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 14How do I change the volume of operation sounds or alarm sounds?
- 15How do I change the needle ?
- 16How do I wind the bobbin?
- 17"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 18"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
- 19How do I calibrate the sensor pen?
- 20How do I remove or attach the Embroidery foot ?
- 21How do I attach or remove the Embroidery Unit?
- 22"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 23"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 24When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 25If the thread breaks during sewing.
- 26"This file cannot be used." message appears on the LCD. What does it mean?
- 27"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 28"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
- 29"Set the clock." message appears on the LCD. What does it mean?
- 30"Sensor module error." message appears on the LCD. What does it mean?
- 31"Failed to save file." message appears on the LCD. What does it mean?
- 32How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
- 33"Transmitting by USB" message appears on the LCD. What does it mean?
- 34"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 35"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 36"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 37Why is the outline sewing off the pattern?
- 38Upper threading (Point)
- 39When thread got tangled.
- 40"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 41"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
- 42"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
- 43How do I adjust the clock on the display?
- 44"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 45"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 46"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 47"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 48"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 49Why does the lower thread keep breaking?
- 50Fabrics and stabilizer material for embroidery