FAQs & Troubleshooting
![]() |
Popular |
56 Results
- 1Basic operations and embroidery functions [Video instructions]
- 2Touch panel is malfunctioning.
- 3How do I adjust the sensitivity of the operation keys?
- 4How do I wind the bobbin?
- 5How do I hoop the fabric in the embroidery frame?
- 6How do I set the bobbin?
- 7How do I attach or remove the embroidery frame ?
- 8How to use the memory function to save embroidery patterns
- 9How do I adjust thread tension for embroidering?
- 10How to change the needle stop position
- 11"Preventive maintenance is recommended." ppears on the LCD.
- 12How do I remove or attach the Embroidery foot ?
- 13Tips for getting better embroidery results
- 14How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 15It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 16How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 17How do I thread the machine (Threading the upper thread)?
- 18Fabric puckers
- 19Upper thread breaks.
- 20Stitches are skipped
- 21How do I change the needle ?
- 22Where do I put the oil in my machine?
- 23How do I clean the race?
- 24Embroidery
- 25Needle breaks.
- 26How do I attach or remove the Embroidery Unit?
- 27Bobbin thread breaks
- 28"F04" appears on the LCD. What does it mean?
- 29"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 30Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 31"USB media error" message appears on the LCD. What does it mean?
- 32"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 33"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 34"F06" appears on the LCD. What does it mean?
- 35"F05" appears on the LCD. What does it mean?
- 36"F03" appears on the LCD. What does it mean?
- 37"F01" appears on the LCD. What does it mean?
- 38"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?
- 39"The bobbin thread is almost empty." message appears on the LCD during embroidering and the machine has stopped. What does it mean?
- 40"This pattern cannot be used." message appears on the LCD. What does it mean?
- 41"F07" appears on the LCD. What does it mean?
- 42"F02" appears on the LCD. What does it mean?
- 43"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 44"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 45When the thread became tangled under the bobbin winder seat
- 46"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 47"This USB media cannot be used." message appears on the LCD. What does it mean?
- 48"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 49"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 50"Data volume is too large for this pattern." message appears on the LCD. What does it mean?