FAQs & Troubleshooting
![]() |
Popular |
49 Results
- 1How do I adjust the sensitivity of the operation keys?
- 2How do I hoop the fabric in the embroidery frame?
- 3How do I adjust thread tension for embroidering?
- 4Tutorial videos on how to use the machine [Video instructions]
- 5Where do I put the oil in my machine?
- 6How do I enter a line feed in the embroidery pattern?
- 7Embroidery
- 8"Preventive maintenance is recommended" appears on the LCD.
- 9How do I save the embroidery patterns in the machine’s memory?
- 10How do I change the font type in the embroidery pattern?
- 11"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 12"This USB media cannot be used." message appears on the LCD. What does it mean?
- 13"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 14"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 15"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 16"F**" appears on the LCD. What does it mean?
- 17"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 18"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 19"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 20"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 21"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 22"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean and how do I clear it?
- 23Bobbin thread breaks
- 24"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 25How do I change the needle ?
- 26"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?
- 27"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 28"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 29Fabric puckers
- 30Stitches are skipped
- 31How do I edit a single letter in the embroidery pattern?
- 32"Not enough available memory to save." message appears on the LCD. What does it mean?
- 33How do I remove or attach the presser foot ?
- 34How do I set the bobbin ?
- 35How do I thread the machine (Threading the upper thread)?
- 36"USB media error" message appears on the LCD. What does it mean?
- 37How do I clean the race?
- 38Upper thread breaks.
- 39"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 40How do I attach or remove the embroidery frame ?
- 41How do I wind the bobbin?
- 42"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 43"This pattern cannot be used." message appears on the LCD. What does it mean?
- 44Needle breaks.
- 45"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 46How do I retrieve the patterns from the machine’s memory?
- 47How do I remove or attach the Embroidery foot ?
- 48"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 49How do I attach or remove the Embroidery Unit?