FAQs & Troubleshooting
![]() |
Popular |
125 Results
- 1How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 2Combination of fabric, thread and needle
- 3How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 4How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 5How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 6How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 7How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 8How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 9How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 10How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 11Fabric and Thread
- 12How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 13How do I specify the needle drop position using the sensor pen?
- 14"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 15How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 16The bobbin thread cannot be pulled up.
- 17How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 18How do I thread my machine ?
- 19How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 20How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 21How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 22How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 23How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 24How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 25How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 26How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 27Where do I put the oil in my machine?
- 28"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 29"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 30"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 31"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 32For better results when sewing stretch fabrics
- 33"The needle position cannot be changed for this stitch." message appears on the LCD. What does it mean?
- 34How do I attach the walking foot ?
- 35How do I set the bobbin ?
- 36"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 37"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 38"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 39The thread tension is incorrect.
- 40How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 41The machine does not make stitches
- 42How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 43"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 44"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
- 45"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 46"An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 47How to specify the Guideline Marker Position With the Sensor Pen
- 48How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 49How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 50How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]