FAQs & Troubleshooting
 |
Popular |
34 Results
- 1Cleaning
- 2How to use the Hemming set. (Optional accessory : SA221CV) [Video instructions]
- 3How to use the Belt loop guide. (Optional accessory : SA223CV) [Video instructions]
- 4The fabric becomes wavy after sewing
- 5Fabrics cannot be pulled out after sewing
- 6Adjusting the thread tension dials
- 7Stitches on top side are not made.
- 8The machine does not work.
- 9How do I remove the top cover spreader and top cover thread guide from the machine?
- 10Threading the machine [Video instructions]
- 11Adjusting the presser foot pressure
- 12The different type of the cover stitches and a general guideline for thread tension settings.
- 13How to remove the fabric from the machine when sewing top cover stitches.
- 14How to remove the fabric from the machine when sewing cover stitches.
- 15How do I thread the machine?
- 16How to adjust the stitch length
- 17How to adjust the looper thread tension
- 18Free-arm sewing
- 19How to attach and remove the presser foot
- 20How to remove and install the needle
- 21Fabric is puckered
- 22Stitches are not uniform
- 23Threads break
- 24Fabric does not feed.
- 25How to use the Dual function fold binder. (Optional accessory : SA231CV) [Video instructions]
- 26How to use the Bias tape folder. (Optional accessory : SA222CV) [Video instructions]
- 27Stitches on back side are not made.
- 28The thread tension is incorrect.
- 29The different type of the top cover stitches and a general guideline for thread tension settings.
- 30Basic operations and sewing [Video instructions]
- 31Differential feed adjustment
- 32Stitches are skipped.
- 33Needles break
- 34Preparation before threading
