FAQs & Troubleshooting
![]() |
Popular |
33 Results
- 1Oiling
- 2How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 3Preparation before threading
- 4How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 5How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 6Differential feed adjustment
- 7To secure chains
- 8Adjusting the presser foot pressure
- 9How to remove and install the needle
- 10Needle
- 11If threads break during sewing
- 12Retracting knife
- 13Free-arm sewing (removing bed extension)
- 14Threading the left needle
- 15Threading the upper looper
- 16How to use the thread spool cap
- 17How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 18How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 19How to set the thread change assembly (Two-thread sewing)
- 20Using the wide table
- 21How to attach and remove the presser foot
- 22Cleaning
- 23Sewing Materials, Threads and Needles Comparison Chart
- 24Fabric is puckered
- 25Stitches are not uniform
- 26Skipped stitches
- 27Threads break
- 28Needles break
- 29The fabric does not feed through.
- 30Threading the right needle
- 31Threading the lower looper
- 32THREADING
- 33Adjusting the thread tension dials