FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 2How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 3How to Embroider on Clothes. [Video instructions]
- 4How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 5How to set up the cap frame driver. [Video instructions]
- 6There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 7Maintenance (Oiling the machine) [ Video ]
- 8Maintenance (Cleaning the bobbin case) [ Video ]
- 9How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 10How to Embroider on Cap. [Video instructions]
- 11Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 12Maintenance (Clean the hook) [ Video ]
- 13How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 14Maintenance (Cleaning around the needle plate) [ Video ]
- 15How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 16How to Embroider on Bag. [Video instructions]
- 17How to Embroider on Pet Collar. [Video instructions]
- 18How to use the the versatile magnetic frame [Video instructions]
- 19How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 20Embroidery
- 21Stabilizers (Backing)
- 22How to use the Round frame (PRPRFK1) [Video instructions]
- 23"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 24How to Embroider on Shoes. [Video instructions]
- 25"Transmitting by USB" message appears on the LCD. What does it mean?
- 26"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 27"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 28How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 29How do I change the volume of operation sounds or alarm sounds?
- 30Maintenance (Cleaning the thread paths of the upper threads)
- 31Maintenance (Cleaning around the needle plate)
- 32How do I create a space between characters?
- 33Fabric and Thread
- 34"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 35Maintenance (Oiling the machine)
- 36When thread got tangled
- 37"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 38"Trimming sensor error." message appears on the LCD. What does it mean?
- 39"This pattern cannot be used." message appears on the LCD. What does it mean?
- 40"OK to cancel embroidering?" message appears on the LCD. What does it mean?
- 41"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 42"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 43How to set up the cap frame. [Video instructions]
- 44"Stop while needle bar case transferring." message appears on the LCD. What does it mean?
- 45"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 46"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 47"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 48"This USB media cannot be used." message appears on the LCD. What does it mean?
- 49"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 50"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?