FAQs & Troubleshooting
Popular |
94 Results
- 1Creating Beautiful Embroidery ( Hooping techniques )
- 2Embroidery pattern does not sew out correctly.
- 3How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 4There is puckering in the fabric.
- 5Why does the upper thread keep breaking?
- 6How do I embroider on small pieces of fabric ?
- 7How do I attach or remove the embroidery frame ?
- 8Nothing happens, even if the LCD display is pressed.
- 9How to Embroider on Cap. [Video instructions]
- 10Although the thread is not broken, a broken thread error occurs and the machine stops.
- 11Stitches are skipped.
- 12The needle threader cannot be used.
- 13How to set up the cap frame driver. [Video instructions]
- 14How to set up the cap frame. [Video instructions]
- 15How to Embroider on Shoes. [Video instructions]
- 16How to Embroider on Pet Collar. [Video instructions]
- 17Color thread table
- 18How to Embroider on Bag. [Video instructions]
- 19Colors of Tajima (.dst) embroidery data
- 20When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 21The thread tension is incorrect.
- 22How do I use the embroidery sheet ?
- 23Loops appear on the surface of the fabric when embroidering.
- 24Fabric/stabilizer compatibility chart
- 25Maintenance (Cleaning the bobbin case)
- 26There are needle cuts or holes in the garment.
- 27What is DST ?
- 28Maintenance (Cleaning the thread paths of the upper threads)
- 29Why does the needle keep breaking?
- 30Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 31How do I change the needle?
- 32How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 33"Preventive maintenance is recommended" appears on the LCD.
- 34How do I resume embroidering after turning off the machine ?
- 35Stabilizers (Backing)
- 36Creating Beautiful Embroidery (Threads)
- 37Maintenance (Clean the hook)
- 38How do I thread the machine? (Threading the upper thread)
- 39"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 40How do I adjust the tension of the upper thread ?
- 41Maintenance (Oiling the machine)
- 42Maintenance (Cleaning around the needle plate)
- 43How do I wind the bobbin?
- 44"This pattern cannot combine." message appears on the LCD. What does it mean?
- 45How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 46"Needle threader error." message appears on the LCD. What does it mean and how do I clear it?
- 47How do I adjust the tension of the bobbin thread ?
- 48How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 49"Trimming sensor error." message appears on the LCD. What does it mean?
- 50What is Wiper ?