FAQs & Troubleshooting
Popular |
127 Results
- 1Combination of fabric, thread and needle
- 2When thread got tangled.
- 3How to use the Multi-purpose Screwdriver.
- 4Fabric and Thread
- 5How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 6How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 7How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 8Why does the lower thread keep breaking?
- 9How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 10How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 11The bobbin thread cannot be pulled up.
- 12The machine does not make stitches
- 13How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 14How do I clean the race?
- 15How do I change the needle ?
- 16When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 17How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 18"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 19How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 20How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 21How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 22How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 23How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 24How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 25For better results when sewing stretch fabrics
- 26"Set the clock." message appears on the LCD. What does it mean?
- 27Upper threading (Point)
- 28How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 29How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 30How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 31How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 32How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 33How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 34How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 35How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 36How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 37Where do I put the oil in my machine?
- 38When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 39"Preventive maintenance is recommended" appears on the LCD.
- 40Embroidery
- 41"OK to delete the setting?" message appears on the LCD. What does it mean?
- 42How do I remove or attach the presser foot ?
- 43How do I thread my machine when using the twin needle mode ?
- 44How do I thread my machine ?
- 45How do I set the bobbin ?
- 46"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 47"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 48How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 49How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 50How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]