FAQs & Troubleshooting
![]() |
Popular |
149 Results
- 1How to use the Multi-purpose Screwdriver.
- 2How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 3How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 4How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 5When thread got tangled.
- 6Combination of fabric, thread and needle
- 7How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 8Why does the lower thread keep breaking?
- 9When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 10How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 11How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 12The bobbin thread cannot be pulled up.
- 13How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 14How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 15Embroidery
- 16How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 17How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 18How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 19Where do I put the oil in my machine?
- 20How do I create a space between characters?
- 21How do I clean the race?
- 22How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 23"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 24Fabric and Thread
- 25The machine does not make stitches
- 26How do I set the bobbin ?
- 27How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 28How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 29Fabrics and stabilizer material for embroidery
- 30Upper threading (Point)
- 31"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
- 32How do I change the volume of operation sounds or alarm sounds?
- 33Why is the outline sewing off the pattern?
- 34How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 35How do I remove or attach the presser foot holder?
- 36For better results when sewing stretch fabrics
- 37"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 38How do I adjust the clock on the display?
- 39How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 40How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 41How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 42How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 43How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 44How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 45"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 46"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 47"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 48How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 49"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 50"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?