FAQs & Troubleshooting
![]() |
Popular |
33 Results
- 1How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 2How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 3How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 4How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 5How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 6Stitches are not uniform
- 7Threading the right needle
- 8Fabric is puckered
- 9Threading the left needle
- 10THREADING
- 11Needle
- 12How to set the thread change assembly (Two-thread sewing)
- 13Using the wide table
- 14Oiling
- 15To secure chains
- 16How to use the thread spool cap
- 17Adjusting the presser foot pressure
- 18Adjusting the thread tension dials
- 19How to attach and remove the presser foot
- 20Preparation before threading
- 21How to remove and install the needle
- 22Needles break
- 23Threading the upper looper
- 24Cleaning
- 25If threads break during sewing
- 26Threads break
- 27Differential feed adjustment
- 28Retracting knife
- 29The fabric does not feed through.
- 30Threading the lower looper
- 31Skipped stitches
- 32Free-arm sewing (removing bed extension)
- 33Sewing Materials, Threads and Needles Comparison Chart