FAQs & Troubleshooting
![]() |
Popular |
237 Results
- 151M4452001 appears on the Artspira app screen.
- 152M3124301 appears on the Artspira app screen.
- 153"Turn off the machine before attaching or removing the needle plate." message appears on the LCD. What does it mean?
- 154"Pattern extends to the outside of embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
- 155"The safety device was activated since the needle position sensor malfunctioned." message appears on the LCD. What does it mean?
- 156"The safety device was activated since the main shaft motor was heated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 157How to set up the wireless network connection with the wizard on the machine
- 158"Not enough available memory to save the data. Delete some patterns or use a different media." message appears on the LCD. What does it mean?
- 159Tangled thread on wrong side of fabric
- 160Fabric is caught in the machine and cannot be removed
- 161Incorrect thread tension
- 162When the thread became tangled under the bobbin winder seat
- 163"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- 164"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 165How do I thread my machine ?
- 166How do I wind the bobbin?
- 167"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 168"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 169"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 170Data cannot be saved to a USB flash drive
- 171Multiple data cannot be transferred to the machine at once
- 172There is no machine that can be transferred
- 173How to stop "Send usage information to help improve Brother products and services"
- 174How to disconnect the machine from Artspira using the Artspira app
- 175About the contents and data treated by Artspira app
- 176M4341001 appears on the Artspira app screen.
- 177M2513631 appears on the Artspira app screen.
- 178M2102501 appears on the Artspira app screen.
- 179What file format can I use when transferring images from MyDesignSnap to the machine? [for iPhone and iPad]
- 180"The SSID and Network Key are incorrect." message appears on the LCD. What does it mean?
- 181How to Change Embroidering Order (My Connection) [Video]
- 182The App shows the message "Machine cannot accept the additional image. Please proceed to embroidery screen then select OK to the message ... mobile app. Update?"
- 183How do I get a lens calibration sheet?
- 184"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 185"OK to cancel the current stitch selection?" message appears on the LCD. What does it mean?
- 186"OK to cancel the current pattern selection?" message appears on the LCD. What does it mean?
- 187"No more stitches can be combined." message appears on the LCD. What does it mean?
- 188"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 189"The safety device was activated since the main shaft motor seized. Is the thread tangled?" message appears on the LCD. What does it mean?
- 190The wireless network connection cannot be set up between the embroidery machine and the computer with PE-DESIGN 11.
- 191"Select a stitch." message appears on the LCD. What does it mean?
- 192How do I save an embroidery pattern to a USB flash drive?
- 193High-pitched sound while embroidering
- 194Cannot thread the needle.
- 195The bobbin thread cannot be pulled up.
- 196Bobbin thread breaks
- 197A broken needle has fallen into the machine.
- 198"OK to move the embroidery carriage to its previous position?" message appears on the LCD. What does it mean?
- 199How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 200How do I hoop the fabric in the embroidery frame?