FAQs & Troubleshooting
![]() |
Popular |
149 Results
- 51How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 52"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 53"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 54When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 55How do I sew buttonholes?
- 56How do I sew a blind hem?
- 57"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 58How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 59If the thread breaks during sewing.
- 60"Set the clock." message appears on the LCD. What does it mean?
- 61"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 62"An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 63How do I change the volume of operation sounds or alarm sounds?
- 64How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
- 65How do I calibrate the sensor pen?
- 66How do I wind the bobbin?
- 67How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 68How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 69How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 70How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 71How do I specify the sewing end point with the sensor pen for utility stitches?
- 72"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 73"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
- 74"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
- 75"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
- 76How do I specify the needle drop position using the sensor pen?
- 77How to specify the Guideline Marker Position With the Sensor Pen
- 78How do I attach or remove the embroidery frame ?
- 79How do I change the needle ?
- 80How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 81How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 82How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 83How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 84How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 85How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 86How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 87"This USB media is incompatible." message appears on the LCD. What does it mean?
- 88"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 89"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 90Why does the needle keep breaking?
- 91Upper threading (Point)
- 92How do I specify the sewing end point with the sensor pen for utility stitches/ character decorative stitches?
- 93"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 94"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 95"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 96"Sensor module error." message appears on the LCD. What does it mean?
- 97"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- 98"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
- 99"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 100How do I specify the stitchiing width and stitch position using the sensor pen?