FAQs & Troubleshooting
Popular |
97 Results
- 51Fabrics and stabilizer material for embroidery
- 52Place a spool of thread on a spool pin.
- 53F** or "F*" appears on the LCD. What does it mean?
- 54How do I thread the needle?
- 55How do I wind the bobbin?
- 56"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 57"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 58"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 59"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 60"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 61"Lower the buttonhole lever." appears on the LCD.
- 62"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 63The thread tension is incorrect.
- 64Why does the needle keep breaking?
- 65How do I sew buttonholes?
- 66How do I correctly install a bobbin?
- 67How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 68How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 69For better results when sewing stretch fabrics
- 70How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 71How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 72Where do I put the oil in my machine?
- 73How do I save often-used patterns in the machine's memory?
- 74"Lower the presser foot lever." appears on the LCD.
- 75With free-motion quilting, skipped stitches or needle breakage occur
- 76"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 77"Deleting..." message appearing on the LCD. What does it mean?
- 78"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 79"Saving..." message appearing on the LCD. What does it mean?
- 80"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 81"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 82"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 83"Selected a pattern." appears on the LCD.
- 84"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 85"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 86"Change to the single needle mode." appears on the LCD.
- 87"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 88"The safety device has been activated." appears on the LCD.
- 89How do I raise or lower the feed dogs?
- 90Why does my thread keep jamming?
- 91The embroidery cover (the extension table) cannot put on the embroidery unit.
- 92Why is the outline sewing off the pattern?
- 93How do I sew an applique?
- 94How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 95How do I sew such as vinyl, leather, quilting layers and velvet?
- 96How do I sew a blind hem?
- 97Upper threading (Point)