FAQs & Troubleshooting
![]() |
Popular |
98 Results
- 51Nothing happens, even if the LCD display is pressed.
- 52Upper thread tightened up.
- 53There are needle cuts or holes in the garment.
- 54Although the thread is not broken, a broken thread error occurs and the machine stops.
- 55The upper thread does not reach the bobbin thread when embroidering begins.
- 56The machine is noisy while embroidering.
- 57Loops appear on the surface of the fabric when embroidering.
- 58"OK to delete the selected pattern?" message appears on the LCD.What does it mean?
- 59"This USB media is incompatible." message appears on the LCD. What does it mean and how do I clear it?
- 60"This USB media cannot be used." message appears on the LCD. What does it mean?
- 61"This pattern cannot combine." message appears on the LCD. What does it mean?
- 62"This pattern cannot be used." message appears on the LCD. What does it mean?
- 63"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 64"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 65"This function cannot be used when patterns are overlapping." message appears on the LCD. What does it mean and how do I clear it?
- 66"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 67"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 68"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean and how do I clear it?
- 69"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 70"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 71"OK to cancel embroidering?" message appears on the LCD. What does it mean and how do I clear it?
- 72"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 73"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 74"Check upper and bobbin thread." message appears on the LCD. What does it mean and how do I clear it?
- 75"Can not recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean and how do I clear it?
- 76"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 77How do I embroider on small pieces of fabric ?
- 78How do I use the embroidery sheet ?
- 79How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 80Creating Beautiful Embroidery (Threads)
- 81How do I resume embroidering after turning off the machine ?
- 82How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 83How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 84Colors of Tajima (.dst) embroidery data
- 85What is DST ?
- 86What is Wiper ?
- 87How do I wind the bobbin?
- 88Maintenance (Oiling the machine)
- 89Maintenance (Cleaning the thread paths of the upper threads)
- 90Maintenance (Cleaning the bobbin case)
- 91Maintenance (Cleaning around the needle plate)
- 92Maintenance (Clean the hook)
- 93"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 94"Needle threader is in threading position." message appears on the LCD. What does it mean and how do I clear it?
- 95"Needle threader error." message appears on the LCD. What does it mean and how do I clear it?
- 96How do I install the bobbin wound with thread?
- 97Fabric/stabilizer compatibility chart
- 98"Preventive maintenance is recommended" appears on the LCD.