FAQs & Troubleshooting
![]() |
Popular |
149 Results
- 51How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 52How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 53How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 54How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 55"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 56When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 57"Preventive maintenance is recommended" appears on the LCD.
- 58"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 59"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 60"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
- 61How do I change the volume of operation sounds or alarm sounds?
- 62"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 63How do I sew an applique?
- 64How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 65The bobbin thread cannot be pulled up.
- 66How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 67"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 68How do I remove or attach the presser foot holder?
- 69If the thread breaks during sewing.
- 70"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 71How to specify the Guideline Marker Position With the Sensor Pen
- 72How do I thread my machine when using the twin needle mode ?
- 73How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 74How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 75How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 76Why does the needle keep breaking?
- 77"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 78"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 79"An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 80How do I adjust the clock on the display?
- 81How do I change the needle ?
- 82How do I remove or attach the presser foot ?
- 83How do I thread my machine ?
- 84"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 85"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 86"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 87"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 88"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 89Why is the outline sewing off the pattern?
- 90Upper threading (Point)
- 91When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 92How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 93How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 94How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 95How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 96How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 97How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 98How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 99How do I specify the sewing end point with the sensor pen for utility stitches/ character decorative stitches?
- 100How do I specify the sewing end point with the sensor pen for utility stitches?