FAQs & Troubleshooting
Popular |
75 Results
- 1Combination of fabric, thread and needle
- 2Fabric and Thread
- 3Embroidery
- 4It is difficult to pass the thread through the needle bar thread guide(hook).
- 5How do I remove the presser foot holder?
- 6Place a spool of thread on a spool pin.
- 7Where do I put the oil in my machine?
- 8"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appearing on the LCD. What does it mean and how do I clear it?
- 9"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?
- 10The thread tension is incorrect.
- 11Why does the lower thread keep breaking?
- 12How do I correctly install a bobbin?
- 13How do I create a space between characters?
- 14Sometimes I insert a memory card or floppy disk, touch the appropriate icon, and the SG3000 screen blanks out, then turns back on. Sometimes the designs come up, but when I choose a design, the screen blanks out. Why is this?
- 15How do I wind the bobbin?
- 16"There is a pattern included that can not be saved to a floppy disk. Save the pattern in the machine's memory." message appearing on the LCD. What does it mean and how do I clear it?
- 17"Can not read this disk. This disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?
- 18How do I raise or lower the feed dogs?
- 19When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 20Fabrics and stabilizer material for embroidery
- 21When thread got tangled.
- 22"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 23"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 24"Formatting the floppy disk." message appearing on the LCD. What does it mean?
- 25"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 26"Data volume is too large for this pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 27How do I sew an applique?
- 28"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 29"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?
- 30"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 31"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 32"This key does not operate when the needle is down. Raise the needle and press the key again." message appearing on the LCD. What does it mean and how do I clear it?
- 33"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 34Why does the upper thread keep breaking?
- 35Why does the needle keep breaking?
- 36How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 37How do I thread my machine?
- 38"Set the bobbin holder to the left." message appearing on the LCD. What does it mean and how do I clear it?
- 39"This disk is not formatted. Do you want to format this disk? Formatting the disk will erase any data currently on the disk." message appearing on the LCD. What does it mean and how do I clear it?
- 40"The pattern is too large for the large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 41"This button does not operate when the embroidery unit is not attached. Turn off the powert and attach the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?
- 42"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
- 43"Can not change the configuration of the characters." message appearing on the LCD. What does it mean and how do I clear it?
- 44"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- 45"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 46"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 47How do I sew buttonholes?
- 48How do I sew such as vinyl, leather, quilting layers and velvet?
- 49"Lower the presser foot lever." appears on the LCD.
- 50"This disk is write protected. Can not delete the pattern. Disengage the write protection and try to delete again." message appearing on the LCD. What does it mean and how do I clear it?