FAQs & Troubleshooting
Popular |
169 Results
- 1How do I adjust the presser foot pressure?
- 2How to use the Multi-purpose Screwdriver.
- 3How to Create a Pattern with Line Scan. [My Design Center]
- 4How do I Play the MPEG-4 (MP4) Videos?
- 5How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 6Incorrect thread tension
- 7How do I edit the stitch stored in the machine with MY CUSTOM STITCH function?
- 8How do I calibrate the setting of the camera needle position?
- 9Tutorial videos on how to use the machine [Video instructions]
- 10How to Use the Thread Trimming Function. (Jump Stitch Trim)
- 11How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 12How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 13The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
- 14"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 15"Failed to save file." message appears on the LCD. What does it mean?
- 16"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 17The machine does not make stitches
- 18How do I use the Multi-function foot controller?
- 19How do I sew decorative stitching using yarn, etc.? (Zigzag Couching )
- 20"Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?
- 21How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 22How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 23"Preventive maintenance is recommended" appears on the LCD.
- 24"Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?
- 25"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 26"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 27"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 28How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 29How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 30How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 31"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 32How do I specify the stitchiing width and stitch position using the sensor pen?
- 33How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 34Where do I put the oil in my machine?
- 35"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
- 36Combination of fabric, thread and needle
- 37"Cannot recognize the fabric edge." message appears on the LCD. What does it mean?
- 38"There are no enough colors in the custom thread table, for the selected mode." message appears on the LCD. What does it mean?
- 39"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
- 40"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 41"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 42"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 43"USB media error" message appears on the LCD. What does it mean?
- 44"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 45"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?
- 46"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 47"There is a pattern included that can not be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean and how do I clear it?
- 48"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 49"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 50"The bobbin thread is almost empty." message appears on the LCD. What does it mean?