FAQs & Troubleshooting
Popular |
58 Results
- 1How to use the Multi-purpose Screwdriver.
- 2"Preventive maintenance is recommended" appears on the LCD.
- 3When thread got tangled.
- 4How do I attach or remove the Embroidery Unit?
- 5When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 6How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 7How do I attach or remove the embroidery frame ?
- 8"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 9How do I change the needle ?
- 10"This USB media is incompatible." message appears on the LCD. What does it mean?
- 11"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 12"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 13How do I set the bobbin ?
- 14Where do I put the oil in my machine?
- 15"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 16How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 17"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 18"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 19"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 20How do I adjust the clock on the display?
- 21"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 22"Transmitting by USB" message appears on the LCD. What does it mean?
- 23"This USB media cannot be used." message appears on the LCD. What does it mean?
- 24"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 25"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 26"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 27"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 28Why does the lower thread keep breaking?
- 29Upper threading (Point)
- 30When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 31How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 32How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 33If the thread breaks during sewing.
- 34"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 35"This file cannot be used." message appears on the LCD. What does it mean?
- 36"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 37"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 38"Set the clock." message appears on the LCD. What does it mean?
- 39"Failed to save file." message appears on the LCD. What does it mean?
- 40How do I change the volume of operation sounds or alarm sounds?
- 41How do I remove or attach the Embroidery foot ?
- 42How do I thread my machine ?
- 43How do I wind the bobbin?
- 44How do I create a space between characters?
- 45"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 46"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 47"USB media error" message appears on the LCD. What does it mean?
- 48"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 49"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 50"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?