FAQs & Troubleshooting
Popular |
102 Results
- 1"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
- 2Fabric puckers
- 3Tutorial videos on how to use the machine [Video instructions]
- 4The pattern transferred from the Artspira app does not appear on the screen of the machine
- 5How to link accounts
- 6The embroidery design cannot be imported to the design page on PE-DESIGN 11 from the embroidery machine via the wireless network.
- 7How do I adjust thread tension for embroidering?
- 8How to connect your machine and transfer data to Artspira
- 9How do I thread the machine (Threading the upper thread)?
- 10Data cannot be saved to a USB flash drive
- 11Data cannot be saved to the machine
- 12Data cannot be transferred even though the machine number has been input. (M5622201)
- 13M4452001 appears on the Artspira app screen.
- 14How do I change the font type in the embroidery pattern?
- 15"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 16When the thread became tangled under the bobbin winder seat
- 17"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 18"This pattern cannot be used." message appears on the LCD. What does it mean?
- 19How do I clean the race?
- 20"Preventive maintenance is recommended." ppears on the LCD.
- 21Embroidery
- 22E92001 appears on the Artspira app screen.
- 23M6331001 appears on the Artspira app screen.
- 24M4210001 appears on the Artspira app screen.
- 25M1332002 appears on the Artspira app screen.
- 26How to update your machine software by downloading the update file directly to your machine using a wireless network
- 27"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 28"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 29How do I remove or attach the Embroidery foot ?
- 30How do I wind the bobbin?
- 31"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 32"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 33I cannot view the Cutting and Embroidery Designs using the [AR function]. (AndroidTM Device only)
- 34E96001 appears on the Artspira app screen.
- 35M5613201 appears on the Artspira app screen.
- 36M5612301 appears on the Artspira app screen.
- 37M4345001 appears on the Artspira app screen.
- 38[Embroidery machine users] How to retrieve the data transferred from Artspira
- 39After selecting data, "Downloading" is displayed and the screen does not change to the next screen
- 40Multiple data cannot be transferred to the machine at once
- 41There is no machine that can be transferred
- 42How to change the displayed language
- 43How to stop "Send usage information to help improve Brother products and services"
- 44How to unsubscribe from Artspira
- 45How to obtain and input PIN of machine
- 46How to disconnect a machine from Artspira using the machine
- 47How to disconnect the machine from Artspira using the Artspira app
- 48About the contents and data treated by Artspira app
- 49Introducing the Brother Artspira application
- 50List of Error Messages for Artspira app (M#######/E#####)