FAQs & Troubleshooting
Popular |
56 Results
- 1How do I remove or attach the Embroidery foot ?
- 2How do I wind the bobbin?
- 3How do I thread the machine (Threading the upper thread)?
- 4How do I adjust thread tension for embroidering?
- 5How do I set the bobbin?
- 6How do I clean the race?
- 7Upper thread breaks.
- 8It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 9How do I hoop the fabric in the embroidery frame?
- 10How do I adjust the sensitivity of the operation keys?
- 11How do I change the needle ?
- 12How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 13How to use the memory function to save embroidery patterns
- 14"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 15"USB media error" message appears on the LCD. What does it mean?
- 16"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 17Tips for getting better embroidery results
- 18"F07" appears on the LCD. What does it mean?
- 19"F05" appears on the LCD. What does it mean?
- 20"F03" appears on the LCD. What does it mean?
- 21Where do I put the oil in my machine?
- 22"This USB media cannot be used." message appears on the LCD. What does it mean?
- 23"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 24"Preventive maintenance is recommended." ppears on the LCD.
- 25"F02" appears on the LCD. What does it mean?
- 26"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 27When the thread became tangled under the bobbin winder seat
- 28"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 29"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?
- 30How to change the needle stop position
- 31Needle breaks.
- 32Bobbin thread breaks
- 33Fabric puckers
- 34Stitches are skipped
- 35"F06" appears on the LCD. What does it mean?
- 36"F04" appears on the LCD. What does it mean?
- 37"F01" appears on the LCD. What does it mean?
- 38Basic operations and embroidery functions [Video instructions]
- 39Touch panel is malfunctioning.
- 40"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 41Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 42How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 43"Not enough available memory to save." message appears on the LCD. What does it mean?
- 44"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 45"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 46"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 47How do I attach or remove the embroidery frame ?
- 48How do I attach or remove the Embroidery Unit?
- 49"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 50"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?