FAQs & Troubleshooting
Popular |
173 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2Fabric puckers
- 3Stitches are skipped
- 4Tips for sewing thin fabrics
- 5Touch panel is malfunctioning.
- 6How do I hoop the fabric in the embroidery frame?
- 7How do I adjust thread tension for embroidering?
- 8Machine does not start to sew.
- 9The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
- 10How do I adjust the sensitivity of the operation keys?
- 11How do I wind the bobbin?
- 12Combination of fabric, thread and needle
- 13"Preventive maintenance is recommended." ppears on the LCD.
- 14How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 15How do I thread the machine (Threading the upper thread)?
- 16The embroidery design cannot be imported to the design page on PE-DESIGN 11 from the embroidery machine via the wireless network.
- 17How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 18How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 19Data cannot be saved to a USB flash drive
- 20Basic technique for sewing
- 21Tips for sewing thick fabrics
- 22How to adjust the thread tension
- 23The pattern transferred from the Artspira app does not appear on the screen of the machine
- 24It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 25How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 26The wireless network connection cannot be set up between the embroidery machine and the computer with PE-DESIGN 11.
- 27Bobbin thread breaks
- 28Basic procedure to sew stitches
- 29How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 30How do I pull up the bobbin thread?
- 31"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
- 32How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 33How do I adjust a stitch width or length?
- 34How do I change the needle ?
- 35How do I remove or attach the presser foot ?
- 36How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 37Embroidery
- 38How do I set the bobbin?
- 39"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 40How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 41"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
- 42How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 43Tips for getting better embroidery results
- 44How to sew reverse stitches or reinforcement stitches
- 45How to use the foot controller with the machine
- 46"F07" appears on the LCD. What does it mean?
- 47How do I adjust thread tension for embroidering?
- 48How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 49How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 50How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]