FAQs & Troubleshooting
Popular |
57 Results
- 1How do I adjust thread tension for embroidering?
- 2Tutorial videos on how to use the machine [Video instructions]
- 3Where do I put the oil in my machine?
- 4Fabric puckers
- 5When the thread became tangled under the bobbin winder seat
- 6How do I clean the race?
- 7How to use the Multi-purpose Screwdriver.
- 8How do I hoop the fabric in the embroidery frame?
- 9How do I select or display patterns according to the embroidery frame size?
- 10How do I retrieve the patterns from the machine’s memory?
- 11"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 12Stitches are skipped
- 13How do I enter a line feed in the embroidery pattern?
- 14"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 15How do I change the needle ?
- 16How do I set the bobbin ?
- 17"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 18"Preventive maintenance is recommended" appears on the LCD.
- 19Embroidery
- 20Needle breaks.
- 21"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 22"Not enough available memory to save." message appears on the LCD. What does it mean?
- 23"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 24How do I remove or attach the Embroidery foot ?
- 25How do I remove or attach the presser foot ?
- 26How do I thread the machine (Threading the upper thread)?
- 27How do I wind the bobbin?
- 28"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 29"USB media error" message appears on the LCD. What does it mean?
- 30"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 31"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 32Upper thread breaks.
- 33Bobbin thread breaks
- 34"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 35How do I adjust the sensitivity of the operation keys?
- 36How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 37How do I save the embroidery patterns in the machine’s memory?
- 38How do I edit a single letter in the embroidery pattern?
- 39How do I change the font type in the embroidery pattern?
- 40"F**" appears on the LCD. What does it mean?
- 41"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 42"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 43"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 44"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 45"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 46How do I attach or remove the embroidery frame ?
- 47How do I attach or remove the Embroidery Unit?
- 48"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 49"This USB media cannot be used." message appears on the LCD. What does it mean?
- 50"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?