FAQs & Troubleshooting
![]() |
Popular |
45 Results
- 1It is difficult to pass the thread through the needle bar thread guide(hook).
- 2Place a spool of thread on a spool pin.
- 3When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 4Where do I put the oil in my machine?
- 5Upper Threading (Threading the upper thread)
- 6"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 7"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 8"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 9Fabrics and stabilizer material for embroidery
- 10How do I clean the race?
- 11How do I adjust a bobbin case using an embroidery pattern?
- 12Embroidery
- 13How do I save often-used patterns in the machine's memory?
- 14How do I create a space between characters?
- 15"Deleting..." message appearing on the LCD. What does it mean?
- 16"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?
- 17"Saving..." message appearing on the LCD. What does it mean?
- 18"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 19"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 20Why does the lower thread keep breaking?
- 21F** or "F*" appears on the LCD. What does it mean?
- 22How do I wind the bobbin?
- 23"Lower the presser foot lever." appears on the LCD.
- 24How do I recall a specific embroidery pattern from the computer?
- 25"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 26"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 27"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 28"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 29"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 30"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 31How do I confirm Windows98SE?
- 32How do I select patterns from the embroidery cards (sold separately)?
- 33Upper threading (Point)
- 34How do I attach the embroidery frame?
- 35"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 36"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 37"Select a pattern." message appearing on the LCD. What does it mean?
- 38"This embroidery pattern can not be used on this machine." message appearing on the LCD. What does it mean?
- 39"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 40"Insert an embroidery card." message appearing on the LCD. What does it mean?
- 41"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 42"The safety device has been activated." appears on the LCD.
- 43Why is the outline sewing off the pattern?
- 44When thread got tangled.
- 45How do I correctly install a bobbin?