FAQs & Troubleshooting
![]() |
Popular |
141 Results
- 1How to use the Multi-purpose Screwdriver.
- 2How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 3Fabric and Thread
- 4How do I recall a specific embroidery pattern from the computer?
- 5Combination of fabric, thread and needle
- 6How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 7How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 8How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 9How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 10"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- 11The needle position for the selecting straight stitch cannot be changed when using the "width" on the display.
- 12Can I get some movies or illustrations on the machine LCD to get how to thread the machine, change presser feet, wind the bobbin, etc?
- 13When thread got tangled.
- 14How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 15How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 16How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 17How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 18How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 19How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 20The stitch patterns cannot be selected.
- 21How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 22"This USB media is incompatible." message appearing on the LCD. What does it mean and how do I clear it?
- 23"The feed dogs are lowerd. Raise them." message appearing on the LCD. What does it mean and how do I clear it?
- 24"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 25"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 26"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 27When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 28How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 29How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 30How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 31How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 32How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 33How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 34How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 35How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 36How can I speed the transfer rate up to retrieve embroidery patterns from the USB flash drive?
- 37When can we use Standard GREEN Marked Bobbin Case?
- 38The needle or the presser foot can not be changed in the free-motion sewing mode.
- 39It is difficult to pass the thread through the needle bar thread guide(hook).
- 40The needle strikes the presser foot
- 41"Change to the extra large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 42"Data volume is too large for this pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 43"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
- 44When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 45How do I clean the race?
- 46How do I confirm Windows98SE?
- 47"Preventive maintenance is recommended" appears on the LCD.
- 48How do I correctly install a bobbin?
- 49For better results when sewing stretch fabrics
- 50How do I thread my machine for use with the twin needle option?