FAQs & Troubleshooting
Popular |
165 Results
- 1Combination of fabric, thread and needle
- 2"Cannot recognize the fabric edge." message appears on the LCD. What does it mean?
- 3How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 4How to use the Multi-purpose Screwdriver.
- 5"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean?
- 6"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 7"There is a pattern included that can not be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean and how do I clear it?
- 8"There are no enough colors in the custom thread table, for the selected mode." message appears on the LCD. What does it mean?
- 9How do I attach the walking foot ?
- 10How do I insert the bobbin case in the machine?
- 11The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
- 12"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 13"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 14"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 15"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 16How do I clean the race?
- 17"Preventive maintenance is recommended" appears on the LCD.
- 18Embroidery
- 19"This file cannot be used." message appears on the LCD. What does it mean?
- 20"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 21How do I create a space between characters?
- 22"OK to move the embroidery carriage to its original position?" message appears on the LCD. What does it mean?
- 23"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 24"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 25"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 26"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 27How do I remove the presser foot holder?
- 28Fabric and Thread
- 29"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 30"Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?
- 31"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 32"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 33"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 34"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 35"Transmitting by USB" message appears on the LCD. What does it mean?
- 36"USB media error" message appears on the LCD. What does it mean?
- 37"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 38"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 39"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 40How do I attach or remove the Embroidery Unit?
- 41How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 42"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 43"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 44"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 45"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 46"Select a pattern." message appears on the LCD. What does it mean?
- 47Place a spool of thread on a spool pin.
- 48"There are no enough colors in the thread table, for the selected mode." message appears on the LCD. What does it mean?
- 49"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 50"This USB media cannot be used." message appears on the LCD. What does it mean?