FAQs & Troubleshooting
![]() |
Popular |
300 Results
- 1Mat and Cutting Blade Combinations
- 2List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 3Mat and Material Combinations
- 4What should I do if the scanned and cut positions are misaligned?
- 5Adjusting the Blade Extension
- 6The mat is fed in at an angle and is not fed during cutting / drawing.
- 7E12002 appears on the computer screen.
- 8Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 9About Blade Extension, Cutting Pressure and Mat
- 10Can I create the cutting data for ScanNCut from vector graphics data?
- 11What type of data can my ScanNCut machine be used?
- 12Can I create the cutting data for ScanNCut from the image data?
- 13Attaching & Peeling Off the Material
- 14If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 15What type of cut files and projects containing cut data other than built-in patterns are available?
- 16E12006 appears on the computer screen.
- 17How long will the mat last?
- 18How to Calibrate the LCD Touchscreen Display
- 19E03006 appears on the computer screen.
- 20N10004 appears on the computer screen.
- 21The mat or the material catches on a feed roller during cutting/drawing.
- 22When the mat is inserted, the attached material peels off.
- 23How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
- 24E99902 appears on the computer screen.
- 25E11006 appears on the computer screen.
- 26E00009 appears on the computer screen.
- 27Pattern Collection activation on CanvasWorkspace(Web). [Video]
- 28Important Notice for using the Foil Transfer Starter Kit
- 29Scanning a Background Image (Background Scanning).
- 30The mat or the material catches on a feed roller when the mat is being inserted.
- 31Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 32ErrS04 appears on the computer screen.
- 33E12003 appears on the computer screen.
- 34E03005 appears on the computer screen.
- 35E02006 appears on the computer screen.
- 36Can different types of material be attached to the same mat for cutting?
- 37Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
- 38How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
- 39E94001 appears on the computer screen.
- 40E10004 appears on the computer screen.
- 41E01001 appears on the computer screen.
- 42E00010 appears on the computer screen.
- 43How to use Enhanced Image Tracing function. [Video]
- 44How to register Your Machine with CanvasWorkspace
- 45When I created a cutting data scanning my illustration, some areas were not converted to the cutting lines.
- 46The 12" × 24" (305 mm × 610 mm) mat cannot be used with scanning function.
- 47The machine is turned off (Auto Shut Down).
- 48The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 49How should the stamp sheet be attached to the acrylic stamp block?
- 50Universal Pen Holder [Video]