FAQs & Troubleshooting
Popular |
71 Results
- 1Why is the outline sewing off the pattern?
- 2How do I thread the needle. [Video instructions]
- 3There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 4How do I thread my machine (Threading the upper thread). [Video instructions]
- 5Why won't the tension set on my sewing machine?
- 6Stabilizers (Backing)
- 7"Cannot format." message appearing on the LCD. What does it mean and how do I clear it?
- 8How to set up the cap frame driver. [Video instructions]
- 9How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 10Maintenance (Oiling the machine)
- 11"Needle bar case home position error." message appearing on the LCD. What does it mean and how do I clear it?
- 12"Stop while needle bar case transferring." message appearing on the LCD. What does it mean and how do I clear it?
- 13How do I thread the machine? (Threading the upper thread)
- 14Place a spool of thread on a spool pin
- 15"The thread number is invalid." message appearing on the LCD. What does it mean and how do I clear it?
- 16"Floppy disk erase error." message appearing on the LCD. What does it mean and how do I clear it?
- 17"Unknown data format." message appearing on the LCD. What does it mean and how do I clear it?
- 18"Embroidery card read error." message appearing on the LCD. What does it mean and how do I clear it?
- 19"Pocket read error." message appearing on the LCD. What does it mean and how do I clear it?
- 20"USB read error." message appearing on the LCD. What does it mean and how do I clear it?
- 21"CompactFlash card read error." message appearing on the LCD. What does it mean and how do I clear it?
- 22"No CompactFlash card." message appearing on the LCD. What does it mean and how do I clear it?
- 23"Save error." message appearing on the LCD. What does it mean and how do I clear it?
- 24"Can not use this disk." message appearing on the LCD. What does it mean and how do I clear it?
- 25"Check if lower thread is broken." message appearing on the LCD. What does it mean and how do I clear it?
- 26When thread got tangled
- 27Hooping the Fabric
- 28When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 29"Preventive maintenance is recommended" appears on the LCD.
- 30Maintenance (Cleaning the bobbin case)
- 31"Impossible to reserve this needle." message appearing on the LCD. What does it mean and how do I clear it?
- 32"The selected embroidery pattern exceeds size of the frame." message appearing on the LCD. What does it mean and how do I clear it?
- 33"Pattern is too large." message appearing on the LCD. What does it mean and how do I clear it?
- 34"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
- 35"CompactFlash Card erase error." message appearing on the LCD. What does it mean and how do I clear it?
- 36"Floppy disk was changed." message appearing on the LCD. What does it mean and how do I clear it?
- 37"Floppy disk write protect." message appearing on the LCD. What does it mean and how do I clear it?
- 38"No disk inserted or this disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?
- 39"Picker error." message appearing on the LCD. What does it mean and how do I clear it?
- 40"Needle bar case position error." message appearing on the LCD. What does it mean and how do I clear it?
- 41Why does my thread keep jamming?
- 42Why won't the machine pick up the bobbin thread?
- 43Recommendation accessories
- 44Fabric/stabilizer compatibility chart
- 45When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the PR series?
- 46How do I confirm Windows98SE?
- 47How to set up the cap frame. [Video instructions]
- 48How do I create a space between characters?
- 49"Needle threader is in threading position." message appearing on the LCD. What does it mean and how do I clear it?
- 50"Impossible to set the start & the end points." message appearing on the LCD. What does it mean and how do I clear it?