FAQs & Troubleshooting
![]() |
Popular |
70 Results
- 1How to set up the cap frame. [Video instructions]
- 2How to set up the cap frame driver. [Video instructions]
- 3Why is the outline sewing off the pattern?
- 4How do I thread my machine (Threading the upper thread). [Video instructions]
- 5There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 6"Preventive maintenance is recommended" appears on the LCD.
- 7"Delete error." message appearing on the LCD. What does it mean and how do I clear it?
- 8"Needle bar case position error." message appearing on the LCD. What does it mean and how do I clear it?
- 9"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appearing on the LCD. What does it mean and how do I clear it?
- 10"Area over." message appearing on the LCD. What does it mean and how do I clear it?
- 11What is the Switch Spool function and how do I use it?
- 12"Not enough space. Delete some patterns or use a different USB media." message appearing on the LCD. What does it mean and how do I clear it?
- 13"Impossible to reserve this needle." message appearing on the LCD. What does it mean and how do I clear it?
- 14"The thread number is invalid." message appearing on the LCD. What does it mean and how do I clear it?
- 15"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
- 16"This embroidery card cannot be used." message appearing on the LCD. What does it mean and how do I clear it?
- 17Why won't the tension set on my sewing machine?
- 18Recommendation accessories
- 19Embroidery
- 20How do I confirm Windows98SE?
- 21Maintenance (Cleaning the bobbin case)
- 22"Needle threader error." message appearing on the LCD.
- 23"Unknown data format." message appearing on the LCD. What does it mean and how do I clear it?
- 24"Change to the big frame." message appearing on the LCD. What does it mean and how do I clear it?
- 25"Too many colors." message appearing on the LCD. What does it mean and how do I clear it?
- 26"Maximum number of patterns have been combined." message appearing on the LCD. What does it mean and how do I clear it?
- 27"Picker error." message appearing on the LCD. What does it mean and how do I clear it?
- 28"Needle bar case home position error." message appearing on the LCD. What does it mean and how do I clear it?
- 29Why does my thread keep jamming?
- 30Fabric/stabilizer compatibility chart
- 31When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the PR series?
- 32Maintenance (Oiling the machine)
- 33"Pattern will not fit. Please delete another pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 34"Needle threader is in threading position." message appearing on the LCD. What does it mean and how do I clear it?
- 35"Impossible to set the start & the end points." message appearing on the LCD. What does it mean and how do I clear it?
- 36"Characters cannot be aligned." message appearing on the LCD. What does it mean and how do I clear it?
- 37"This pattern contains too much data to be stored." message appearing on the LCD. What does it mean and how do I clear it?
- 38"Embroidery card read error." message appearing on the LCD. What does it mean and how do I clear it?
- 39"USB read error." message appearing on the LCD. What does it mean and how do I clear it?
- 40"Wiper error." message appearing on the LCD. What does it mean and how do I clear it?
- 41"Inappropriate needle stop position." message appearing on the LCD. What does it mean and how do I clear it?
- 42How do I thread the machine? (Threading the upper thread)
- 43How do I install the bobbin wound with thread
- 44Fabric and Thread
- 45When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 46I tried to update the machine with USB media and pushed "USB HOST". But the screen didn't change for more than 5 minutes and I still can't upgrade it.
- 47"USB media error." message appearing on the LCD. What does it mean and how do I clear it?
- 48"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appearing on the LCD. What does it mean and how do I clear it?
- 49"Impossible to add any more character." message appearing on the LCD. What does it mean and how do I clear it?
- 50"Pattern is too large." message appearing on the LCD. What does it mean and how do I clear it?