FAQs & Troubleshooting
Popular |
33 Results
- 1Oiling
- 2Stitches are not uniform
- 3How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 4How to attach and remove the presser foot
- 5Adjusting the thread tension dials
- 6To secure chains
- 7How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 8How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 9Retracting knife
- 10Fabric is puckered
- 11Threading the left needle
- 12Threading the right needle
- 13Threading the lower looper
- 14THREADING
- 15Adjusting the presser foot pressure
- 16Needle
- 17Free-arm sewing (removing bed extension)
- 18Threads break
- 19Threading the upper looper
- 20Preparation before threading
- 21How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 22How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 23How to set the thread change assembly (Two-thread sewing)
- 24Differential feed adjustment
- 25Using the wide table
- 26How to remove and install the needle
- 27Cleaning
- 28If threads break during sewing
- 29Sewing Materials, Threads and Needles Comparison Chart
- 30Skipped stitches
- 31Needles break
- 32The fabric does not feed through.
- 33How to use the thread spool cap