FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How to Embroider on Bag. [Video instructions]
- 2How to Embroider on Clothes. [Video instructions]
- 3How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 4How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 5How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 6How to Embroider on Pet Collar. [Video instructions]
- 7How to Embroider on Shoes. [Video instructions]
- 8How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 9How to set up the cap frame driver. [Video instructions]
- 10How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 11How to use the Round frame (PRPRFK1) [Video instructions]
- 12How to use the the versatile magnetic frame [Video instructions]
- 13How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 14Maintenance (Oiling the machine) [ Video ]
- 15How to set up the cap frame. [Video instructions]
- 16How to Embroider on Cap. [Video instructions]
- 17Maintenance (Cleaning the bobbin case) [ Video ]
- 18Maintenance (Clean the hook) [ Video ]
- 19How do I thread the machine? (Threading the upper thread)
- 20"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 21"Needle case motor has been locked." message appears on the LCD. What does it mean?
- 22"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 23"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 24"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 25There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 26"Please go to either Embroidering Screen or Embroidering Settings Screen to use the Thread Trimmer." message appears on the LCD. What does it mean?
- 27"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 28"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 29"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 30"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 31"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 32"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 33"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 34Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 35Maintenance (Cleaning the bobbin case)
- 36"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean?
- 37When thread got tangled
- 38"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 39"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
- 40When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 41"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 42"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 43"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 44"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 45"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 46"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 47"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 48"This pattern cannot be used." message appears on the LCD. What does it mean?
- 49"This file cannot be used." message appears on the LCD. What does it mean?
- 50"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?