FAQs & Troubleshooting
Popular |
34 Results
- 1Fabrics cannot be pulled out after sewing
- 2The different type of the top cover stitches and a general guideline for thread tension settings.
- 3How to use the Dual function fold binder. (Optional accessory : SA231CV) [Video instructions]
- 4Basic operations and sewing [Video instructions]
- 5How to use the Belt loop guide. (Optional accessory : SA223CV) [Video instructions]
- 6Adjusting the thread tension dials
- 7How to adjust the stitch length
- 8The different type of the cover stitches and a general guideline for thread tension settings.
- 9Differential feed adjustment
- 10Stitches are skipped.
- 11Needles break
- 12How to remove the fabric from the machine when sewing cover stitches.
- 13How to use the Hemming set. (Optional accessory : SA221CV) [Video instructions]
- 14How to use the Bias tape folder. (Optional accessory : SA222CV) [Video instructions]
- 15The fabric becomes wavy after sewing
- 16Stitches on top side are not made.
- 17Stitches on back side are not made.
- 18The thread tension is incorrect.
- 19The machine does not work.
- 20How to remove the fabric from the machine when sewing top cover stitches.
- 21How do I remove the top cover spreader and top cover thread guide from the machine?
- 22How do I thread the machine?
- 23How to adjust the looper thread tension
- 24Free-arm sewing
- 25Threading the machine [Video instructions]
- 26Adjusting the presser foot pressure
- 27How to attach and remove the presser foot
- 28How to remove and install the needle
- 29Cleaning
- 30Fabric is puckered
- 31Stitches are not uniform
- 32Threads break
- 33Fabric does not feed.
- 34Preparation before threading