FAQs & Troubleshooting
![]() |
Popular |
92 Results
- 51"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
- 52"OK to automatically lower the presser foot?" message appearing on the LCD. What does it mean and how do I clear it?
- 53"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 54"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
- 55"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 56How do I confirm Windows98SE?
- 57Why does my thread keep jamming?
- 58How do I sew a blind hem?
- 59Upper threading (Point)
- 60How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 61How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 62"Turn off the power and replace the needle plate." appears on the LCD.
- 63"In twin needle mode, the needle thread lever cannot be used." message appearing on the LCD. What does it mean and how do I clear it?
- 64"Connected to PC. Do not disconnect the USB cable." message appearing on the LCD. What does it mean and how do I clear it?
- 65"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?
- 66"The bobbin thread is almost empty." message appearing on the LCD. What does it mean and how do I clear it?
- 67"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 68"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 69How do I remove the presser foot holder?
- 70Why does the upper thread keep breaking?
- 71Why does the needle keep breaking?
- 72How do I sew an applique?
- 73How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 74Does my machine support Windows Vista/ Windows7?
- 75How do I thread the needle?
- 76"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 77"Use the presser foot lifter button to lower the presser foot." message appearing on the LCD. What does it mean and how do I clear it?
- 78The thread tension is incorrect.
- 79How do I thread my machine for use with the twin needle option?
- 80How do I thread my machine (Threading the upper thread)?
- 81How do I wind the bobbin?
- 82Sewing is started even though the presser foot is raised.
- 83The "Drop feed key" can not be switched.
- 84With free-motion quilting, skipped stitches or needle breakage occur
- 85Automatic Fabric Sensor System does not function.
- 86The needle or the presser foot can not be changed in the free-motion sewing mode.
- 87The needle strikes the presser foot
- 88"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?
- 89How do I sew buttonholes?
- 90How do I sew such as vinyl, leather, quilting layers and velvet?
- 91Place a spool of thread on a spool pin.
- 92How do I correctly install a bobbin?