FAQs & Troubleshooting
![]() |
Popular |
149 Results
- 51How do I specify the sewing end point with the sensor pen for utility stitches?
- 52If the thread breaks during sewing.
- 53"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 54"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 55"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 56"This file cannot be used." message appears on the LCD. What does it mean?
- 57"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 58"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
- 59"Sensor module error." message appears on the LCD. What does it mean?
- 60"OK to delete the setting?" message appears on the LCD. What does it mean?
- 61How do I specify the stitchiing width and stitch position using the sensor pen?
- 62How do I attach or remove the Embroidery Unit?
- 63How do I thread my machine when using the twin needle mode ?
- 64How do I wind the bobbin?
- 65"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 66"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 67"USB media error" message appears on the LCD. What does it mean?
- 68"This USB media cannot be used." message appears on the LCD. What does it mean?
- 69"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 70"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 71"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 72"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 73"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 74"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 75The thread tension is incorrect.
- 76Why does the needle keep breaking?
- 77When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 78How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 79How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 80How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 81How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 82The bobbin thread cannot be pulled up.
- 83How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 84How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 85How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 86How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 87How to use the Multi-purpose Screwdriver.
- 88How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 89"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 90"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 91"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 92"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
- 93"The needle position cannot be changed for this stitch." message appears on the LCD. What does it mean?
- 94"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
- 95"Set the clock." message appears on the LCD. What does it mean?
- 96"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- 97"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
- 98"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
- 99"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
- 100"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?