MFC-J3720
FAQs & Troubleshooting |
Follow the steps below to load paper in paper tray#2.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
You can only use plain paper sizes Letter or A4 (in Landscape position) and Ledger, Legal or A3 (in Portrait position) in Tray #2.
Always make sure that the paper is not curled.
Be careful not to push the paper in too far; it may lift at the back of the tray and cause feed problems.
When Tray #2 is extended for large size paper, you must also extend Tray #1 out over Tray #2 to prevent printed pages from falling off the output tray.
If you are finished using Ledger, Legal or A3 size paper and want to use Letter or A4 size paper, take the paper out of the tray. Shorten the tray by pressing the universal guide release button (1). Adjust the paper side guides (2) to fit Letter or A4 you are going to use. Lift up the A4/LTR stopper (3). Then put the paper into the tray.