I cannot print on the 103 mm wide label roll on a network using the latest printer driver.
You may need to update your printer's paper information using a BLF file if the following situations occur:
-
P-touch Editor does not detect the 103 mm wide label roll.
-
The printer's page shows "/" or "102mm/4" in View Configuration > Media Type for Paper Source.
![Web Based Management Web Based Management](/g/b/img/faqend/faqp00100488_000/vn/en/2289015/wbm_en.gif)
To update the paper information:
-
Download the BLF file:
QL-1060N |
![Download Download](/g/b/img/faqend/faqp00100488_000/vn/en/2289019/download2.gif) |
-
Download BRAdmin Professional from the [Downloads] section of this website to transfer the BLF file to your network-connected printer.
-
Start BRAdmin Professional.
-
Right-click the printer or print server you want, and select [Load Firmware (Manual)].
-
Select [TFTP PUT], and then click [OK].
-
Enter the default password (access).
-
Select the downloaded BLF file, and then click [OK].
-
When the file transfer is complete, turn the printer off and then on again.
-
Confirm that the 103 mm wide paper can be selected in P-touch Editor or is shown on the printer's Web Based Management page.